Please enter email address associated to your account
Change Password
Password changed successfully.
Request sent!
We will use this to provide you with useful information
Latest Covid-19 Ordering, Delivery & Service status updates here.
Dulux Weathershield Multi-Surface Fungicidal Wash
Your Measurements:
Amount Needed:
For the best result we recommend to use
{coatAmount} for {productTitle}
Key information
Coverage
Up to 24m2/litre
Drying Time
Leave 16-24 hours to dry.
Coats
1
Product Features
Mouldtec formulation protects the paint against mould for five years, keeping your bathroom looking great for longer.
Product Description
Weathershield Multi-Surface Fungicidal Wash from Dulux is suitable for brush application only to new or previously painted interior or exterior wood or masonry surfaces contaminated with mould, algae, fungi or lichen.
Application Description
Apply the solution to all affected areas with a brush. Leave for 24 hours and then thoroughly rinse and scrub with clean water to remove residues and dead growth. Failure to remove residues may result in discolouration of subsequently applied coatings. Repeat the process if necessary. Do not apply in wet weather. Badly affected areas, or if lichen is present may require the use of high pressure water-hosing to remove all organic growth completely. When the surface is fully dry, apply the appropriate Dulux or Weathershield finishing system. TIP: apply only in dry conditions, above 10°C and when bad weather is not forecast.
Health & Safety
Exclamation mark - Causes serious eye irritation.
Causes skin irritation.
Harmful to aquatic life with long lasting effects.
Wash away mould, algae, fungi and lichen from wood or masonry. Suitable for brush application.
2.
Cleaning
Remove as much of this product as pssoble from the brush with a cloth and then wash with water.
3.
Storing
Store this product in dry conditions and protect from extreme temperatures.
How much paint do I need?
Measure the height and length of the surface you want to paint (in metres or centimetres).
Your Measurements:
{{!-- This value will be injected with JavaScript --}}
Amount needed:
{{!-- This value will be injected with JavaScript --}}
This is an estimated based on 2 coats. Actual coverage will depend on the conditions of the surface. If the colour change is strong, more coats may be required.
